New to site

[mdwstang]

Just bought a 94 cobra need to have a shop look over it and dyno tune it any recommendation? I'm in Kittery, ME

[TorchRedSVT]

welcome to the site......congrats on the new cobra. Let's see a couple of pic's

I'd recomend performance Dyno in Loudon, NH.......he is the resident expert around NE and not too far from you.

[LILBLKSNAKE]

Performance Dyno did both of mine 94 5.0 GT and 97 4.6 DOHC COBRA
Let me know when you're heading up there. If you go on a Saturday I'm usually hanging around if he's got a few cars in.

[SmokinStang]

Hi and welcome to the site......

Couple of questions for you
1) How & why did you request to use "MyDixieWrecked" here on the site?

2) You state your from Kittery, ME.....but your IP Address reveals that your actually in TEWKSBURY, MA?

3) Also introductions here on the SmokinStangs.com-Mustang Forum...don't start off with a question, as that is a tech question that should be asked in the appropriate forum area.....such as the SN95 Section: http://www.smokinstangs.com/forumdis...neration-SN-95

NEW MEMBERS INTRODUCTION READS:
If you're a NEW Member.....Welcome to the Site!
Introduce yourself & tell us about your SmokingStang!

*There are plenty of solid examples of such proper introductions, here's one: http://www.smokinstangs.com/showthre...m-Littleton-NH

---

Why the question you may ask? http://www.smokinstangs.com/showthre...1220#post31220

Simply stated...as the sites Administrator a hard look is given to each & every new potential member here on SmokinStangs.com - Mustang Forum, where-as we must ensure that they are Genuine & Credible candidate members.

[mdwstang]

Mr. Smokinstang... I chose my dixiewrecked because I enjoy the play on words... Sorry that I asked a question in the intro forum. I will refrain from doing so from now on thanks to the others for the recommendation I will try to get out there this weekend I originally made the post while riding in the car for a trip to Groton, CT for work. Tonight I will make a post from my home to prove my existence in Kittery, ME. Again I apologize. Thanks again

[FREAKSHOW84]

Welcome,as for a dyno near you,Denny's Autobody in Shapleigh,Me is probably the closest to you. Dennis is very knowledgable,and competes in NMRA factory stock. A couple of my buddies have had there turbo/supercharged cars tuned there with great success. As mentioned,Performance Dyno in Concord is very reputable as well and so is Dez Racing in Mass

[Jibber]

Welcome to the site.

[KillaGT]

welcome to site

[SmokinStang]

You have several Dyno Shop options in the immediate New England Area.....


Denny's Auto body & Used Car Sales
1610 Walnut Hill Road
Shapleigh, Maine 04076
207-490-1655
Web: http://www.dennysautobody.com/

Dez Racing
1761 Fall River Ave
Seekonk, MA 02771
508-336-6588
Web: http://dezracing.net/dyno.html

Granite State Dyno & Tune
45 Rt. 125 / Unit #3
Kingston, NH
603-765-0667
Web: http://www.http://dynonh.com/

Performance Dyno
34 Stainels Road
Loudon, NH 03307
603-226-3278
Web: http://performance-dyno.com/home.html

ProTree Performance & Dyno
120 Ferry Street
Hudson, NH 03051
603-886-0827
Web: http://www.protreeperformance.com/

SV ENGINEERING + Tuning
241C Newbury Street Rt 1N
Peabody, MA 01960
978-278-3559
Web: http://svengineeringperformance.com/index.htm

- Listed in alphabetical order
- This is not a complete list
- SmokinStangs.com is offering this list specifically as a resource only

[Dennis O'Shea]

Welcome to the site.

He must have got a look at the color of your car and got nervous