Page 2 of 32 FirstFirst 123412 ... LastLast
Results 11 to 20 of 313

Thread: 1984 Mustang T Top Coupe Coyote 5.0 Project

  1. #11
    Explore Kenny Brown Performance today!!
    good job, very nice was it a aod or stick,,,
    is the motor worth salvaging for somone else???

  2. #12
    Moderator only5.0s's Avatar
    Join Date
    Jan 2010
    Location
    New England
    Posts
    1,968
    Blog Entries
    1
    Thanks everyone. We are making progress. Tomorrow we finish removing the rest of the lights, door handles, door locks etc so it is ready for Paint at Pro Tree when they are ready for it..!!!

    The 302 is in the Classified Section of the Forum and on Craigslist along with the AOD trans. I can not say they are operational so they are being sold as parts only.
    1984 T Top Coupe-Coyote 5.0, 4R70W, Modified BBK Long Tubes, 3.73s


    *Formerly only90s, but all the 90s are gone..

  3. #13
    Moderator only5.0s's Avatar
    Join Date
    Jan 2010
    Location
    New England
    Posts
    1,968
    Blog Entries
    1
    As of today the following has been removed from the Coupe:

    Engine
    Trans
    Interior
    All lights/directionals
    Door handles,door locks
    Cowl/wipers and some molding

    It will be headed to Pro Tree soon for engine bay smoothing and bodywork/paint......


    SDC11467.jpg

    SDC11469.jpg

    SDC11470.jpg

    photo.JPG

    SDC11449.jpg
    Last edited by only5.0s; 10-18-2011 at 02:22 PM.
    1984 T Top Coupe-Coyote 5.0, 4R70W, Modified BBK Long Tubes, 3.73s


    *Formerly only90s, but all the 90s are gone..

  4. #14
    Smokin 1500HP - Member ToplessPony94's Avatar
    Join Date
    Jan 2010
    Location
    Hudson, NH
    Posts
    2,485
    You've been a hard-working team! Looking like a great project!
    Bruce (aka: "Stealth Fighter Pilot")
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool radiator, alum water pump, MSD 6A/coil,alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, bumpsteer, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB, all LED lights

  5. #15
    c-ya fri !

  6. #16
    Moderator only5.0s's Avatar
    Join Date
    Jan 2010
    Location
    New England
    Posts
    1,968
    Blog Entries
    1
    If anyone sees or has any 85-86 GT front seats...let me know please. If I can find a decent set of those I might recover them black or I will go with the Corbeau GTS II Microsuede seats I have in my Fox-which are really comfortable.
    1984 T Top Coupe-Coyote 5.0, 4R70W, Modified BBK Long Tubes, 3.73s


    *Formerly only90s, but all the 90s are gone..

  7. #17
    Mark making good headway already, I have the crank windows in my car lighter and look cool, cant wait to see more pics.

  8. #18
    Founding Member SmokinStang's Avatar
    Join Date
    Jan 2010
    Location
    ----------------> "Smokin the Competition!"
    Posts
    4,586
    Blog Entries
    3

    84 T-Top / Stripped & Exposed!!

    Here's when you realize your in for some fun....and the creative juices start to flow.

    Exterior Shots:
    DSC_0243.jpg DSC_0235.jpg DSC_0226.jpg DSC_0203.jpg

    Interior Shots:
    DSC_0194.jpg DSC_0111.jpg DSC_0116.jpg DSC_0119.jpg
    SmokinStangs.com......A Premiere Mustang Enthusiast Community-Based Forum.
    "Bringing Mustang Enthusiasts together like never seen before!"

    SmokinStangs.com-- www.SmokinStangs.com


  9. #19
    Moderator only5.0s's Avatar
    Join Date
    Jan 2010
    Location
    New England
    Posts
    1,968
    Blog Entries
    1
    Last weekend we cleaned and painted all the plastic pieces. They were all some funky blueish gray color.

    I used the same process that worked for me on my Fox plastic.

    -Clean all pieces thoroughly...we washed with soap and water and then used alcohol on areas like the glove box and ash tray etc-that have alot of human oils.

    -3 coats of Adhesion Promoter

    -4-5 coats of DupliColor Black Trim Paint

    3 years later the pieces in my Fox still look perfect. I would not suggest doing arm rests or door panels, but the plastic pieces hold up if done right.

    Before:

    SDC11474.jpg

    SDC11475.jpg


    Finished Product....they actually look much better/brighter in person. I also did something with the dash trim piece that goes around the gauges, but you will have to wait until the car is done to see that as it will go with the paint scheme.

    SDC11485.jpg

    SDC11495.jpg
    Last edited by only5.0s; 10-27-2011 at 02:57 PM.
    1984 T Top Coupe-Coyote 5.0, 4R70W, Modified BBK Long Tubes, 3.73s


    *Formerly only90s, but all the 90s are gone..

  10. #20
    Home of the SmokinStangs - Northeast Mustang Rally!
    looks good Mark...

Page 2 of 32 FirstFirst 123412 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •