Results 1 to 4 of 4

Thread: Worst luck and service ever

  1. #1
    Smokin 450HP - Member Resolution78's Avatar
    Join Date
    Jan 2011
    Location
    Baltic ct, or Macungie PA
    Posts
    493

    Worst luck and service ever

    Explore Kenny Brown Performance today!!
    SO, started off i let a friend use my truck ( He helped me out the week before and i was returning the favor).

    They drove out to pick up his new truck and on the way back my truck goes OFFROADING unexpectedly. 8300 in damages my insurance ends up picking up

    so for an extra 2k they say they will paint both halfs of the truck, i figure what the hell get the whole truck done......

    sooo 6 months later CRYSTAL AUTO in baltic CT still doesnt have my truck done, and i pick it up anyway soon to be followed by a small claims court filing for the money back on the repairs., going to get 2 estimates to finish the work to decide the amount then add alittle for the time.

    Soo Driving my truck around finally with front bumper messed up and a few minor things, less than 2 weeks and one of the front brake calipers is locking up, and yesterday morning one of the connecting rods goes threw the block i mean seroiusly WTF
    2012 Boss mustang, UPR c/a, JLT CAI,kooks long tubes flowmaster axle backs tuned by DEZ RACING billet grill LS spoiler 302s HOOD 1/4 window louvers track key446rwhp11.51@119MPH
    1994 Mustang (PROJECT) 347 stroker, 4 bolt main SVO block, windsor senior cast iron heads, Forged motor built and assembled by DEZ RACING, F1C PROCHARGER Full UPR suspension, smoothed front inner fenders, expecting 750 RWHP on pump gas

  2. #2
    Smokin 1500HP - Member ToplessPony94's Avatar
    Join Date
    Jan 2010
    Location
    Hudson, NH
    Posts
    2,485
    Yeah, that's pretty bad luck all right! A few weeks sooner and you could have won the Curse of ED award at Ed Day! It's time for your luck to turn - best of luck repairing or replacing the truck!
    Bruce (aka: "Stealth Fighter Pilot")
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool radiator, alum water pump, MSD 6A/coil,alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, bumpsteer, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB, all LED lights

  3. #3
    Smokin 1500HP - Member TorchRedSVT's Avatar
    Join Date
    Jan 2010
    Location
    Chelmsford, MA
    Posts
    2,324
    something just doesn't add up..........doesn't take that much time to get a truck done.

    and how does someone go off roading "unexpectedly"?!?!?
    --- Ian ---
    2003 SVT Cobra 10th Anniversary Edition -- The Show Car
    1989 LX Vert -- The Cruiser - Sold But Never Forgotten
    2010 GMC Terrain -- The Daily

  4. #4
    Smokin 450HP - Member Resolution78's Avatar
    Join Date
    Jan 2011
    Location
    Baltic ct, or Macungie PA
    Posts
    493
    Home of the SmokinStangs - Northeast Mustang Rally!
    Quote Originally Posted by TorchRedSVT View Post
    something just doesn't add up..........doesn't take that much time to get a truck done.

    and how does someone go off roading "unexpectedly"?!?!?
    well he said the truck jerked to the side ....... myself and the other guy driving the truck in front of him both think he fell asleep behind the wheel

    and your right it doesnt take that long to fix a truck its why im so pissed of

    on the good side i picked up a 2004 rollover truck for 2k with 52k miles on it, pulled the motor today should have my truck up and running again in 2 days working on it after work...... and now i have a spare tranny and rear axle

    those back brakes on the rear axle are HUGE i wounder if i can use them on the mustang lol
    2012 Boss mustang, UPR c/a, JLT CAI,kooks long tubes flowmaster axle backs tuned by DEZ RACING billet grill LS spoiler 302s HOOD 1/4 window louvers track key446rwhp11.51@119MPH
    1994 Mustang (PROJECT) 347 stroker, 4 bolt main SVO block, windsor senior cast iron heads, Forged motor built and assembled by DEZ RACING, F1C PROCHARGER Full UPR suspension, smoothed front inner fenders, expecting 750 RWHP on pump gas

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •