Hey everyone... After tons of research, I pulled the trigger on a complete suspension from BMR - www.bmsuspension.com. I worked with Kelly and he was awesome. Very knowledgeable and responsive. My hope is to break the vert stereotype and turn my GT500 into a real corner carver. Here is what I ordered:
Front 35mm and rear 22mm sway bars
Lowering springs (1.5" rear 1.25" front)
Upper Control arm
Upper control arm mount
Billet Lower control arms
Lower control arm relocation mount
New Camber bolts
Adjustable panhard rod
Panhard rod brace
A-arm support Brace
Sub-frame connectors (Weld on)
Tokico D-Spec adjustable shocks and struts
Upper strut mount
Tunnel brace
Should be awesome.....
Proud owner of a '10 GT500 Vert: 1 of 72 in Torch Red w/ White Stripes
MODS: Metco 2.6" Supercharger Pulley & Auxiliary Idler Assembly; Ford Racing (OEM Borla) stinger Axle Back Exhaust, NGK TR6 Spark Plugs, Tune by Jon Lund, C&R Dual Pass Extreme Duty Heat Exchanger, Tokico D-Spec Shocks/Struts, Complete BMR Suspension (Springs, Sways, Sub-frames, Panhard and bracing up the wazoo)
Work done by the good dudes over at ProTree Performance
Contemplating a 50-75 shot of NOS...
very cool.....you installing all that yourself?
I will be curious to see what you think the before and after ride feel is like
--- Ian ---
2003 SVT Cobra 10th Anniversary Edition -- The Show Car
1989 LX Vert -- The Cruiser -Sold But Never Forgotten
07 Jeep Patriot -- The Daily
Mine was 100% better after I lowered it and beefed up the suspension, you'll notice the difference while it's still on the lift.
1965 Mustang Coupe
1965 Mustang Fastback
1974 Ford Ranchero 500
2003 Mustang GT Convertible
2007 GT500
Looks like I am going to be having the work done by ProTree in Hudson NH - if they ever get back to me with the quote :)
Between the welding of the lower control arm brackets & Subframe connectors and not having access to a lift I feel its best to leave it to someone else.
Proud owner of a '10 GT500 Vert: 1 of 72 in Torch Red w/ White Stripes
MODS: Metco 2.6" Supercharger Pulley & Auxiliary Idler Assembly; Ford Racing (OEM Borla) stinger Axle Back Exhaust, NGK TR6 Spark Plugs, Tune by Jon Lund, C&R Dual Pass Extreme Duty Heat Exchanger, Tokico D-Spec Shocks/Struts, Complete BMR Suspension (Springs, Sways, Sub-frames, Panhard and bracing up the wazoo)
Work done by the good dudes over at ProTree Performance
Contemplating a 50-75 shot of NOS...
Ahhhhh.....Suspension goodies!! Very Nice!!
Survey says that you should be happy with the soon to be - new found changes
Be sure to keep us posted!!![]()
SmokinStangs.com......A Premiere Mustang Enthusiast Community-Based Forum.
"Bringing Mustang Enthusiasts together like never seen before!"
SmokinStangs.com-- www.SmokinStangs.com
Bruce (aka: "Stealth Fighter Pilot") www.ProjectFallenHero.com
TFS TW heads, rockers, 75mm intake, cam, timing chain/gears, 75mm TB, CAI, MAF, 30# injectors, Aeromotive rails/regulator, 255 pump, Fluidyne radiator, alum water pump, MSD 6A/coil, FR 9mm wires, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (F&R Bilstein), rlca, K-brace, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB, Bi-Xenon...
bruce did you call ? i never got the message if you did leave one .. ill pm you now !!
ProTree Performance & Dyno
120 Ferry Street,
Hudson, NH 03051
PH: 603-886-0827
dana@protreeperformance.com
www.protreeperformance.com
Bruce (aka: "Stealth Fighter Pilot") www.ProjectFallenHero.com
TFS TW heads, rockers, 75mm intake, cam, timing chain/gears, 75mm TB, CAI, MAF, 30# injectors, Aeromotive rails/regulator, 255 pump, Fluidyne radiator, alum water pump, MSD 6A/coil, FR 9mm wires, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (F&R Bilstein), rlca, K-brace, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB, Bi-Xenon...
then i sent you one that said call the shop ! lol so i could give you the details :) damn , maybe i clicked the wrong message pm me your number tonight and ill call you in the am !
ProTree Performance & Dyno
120 Ferry Street,
Hudson, NH 03051
PH: 603-886-0827
dana@protreeperformance.com
www.protreeperformance.com
Bruce (aka: "Stealth Fighter Pilot") www.ProjectFallenHero.com
TFS TW heads, rockers, 75mm intake, cam, timing chain/gears, 75mm TB, CAI, MAF, 30# injectors, Aeromotive rails/regulator, 255 pump, Fluidyne radiator, alum water pump, MSD 6A/coil, FR 9mm wires, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (F&R Bilstein), rlca, K-brace, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB, Bi-Xenon...
Bookmarks