Been collecting parts to build up my 94 mustang for some time now, have a 347 stroker a-4 block built by dez racing and a procharger F1C..... YEAH I WANNA GO FAST
2012 Boss mustang, UPR upper/ lowers, JLT CAI, flowmaster axle backs tuned by DEZ RACING , billet grill, LS spoiler, 302s HOOD',1/4 window louvers, track key401RWHP11.9
1994 Mustang (PROJECT) 347 stroker, 4 bolt main SVO block, windsor senior cast iron heads, Forged motor built and assembled by DEZ RACING, F1C PROCHARGER Full UPR suspension, smoothed front inner fenders, expecting 750 RWHP on pump gas
2012 Boss mustang, UPR upper/ lowers, JLT CAI, flowmaster axle backs tuned by DEZ RACING , billet grill, LS spoiler, 302s HOOD',1/4 window louvers, track key401RWHP11.9
1994 Mustang (PROJECT) 347 stroker, 4 bolt main SVO block, windsor senior cast iron heads, Forged motor built and assembled by DEZ RACING, F1C PROCHARGER Full UPR suspension, smoothed front inner fenders, expecting 750 RWHP on pump gas
Nice pile of goodies!!
Any pics of the built 347? What type of coating was used on the item pictured.....it looks to be thicker, more enamel based than Powder Coating? When are all the mods being installed.
SmokinStangs.com......A Premiere Mustang Enthusiast Community-Based Forum.
"Bringing Mustang Enthusiasts together like never seen before!"
SmokinStangs.com-- www.SmokinStangs.com
the coatings are almost all 2 part epoxy done by adamarks coatings in the plainfield CT area.... prices are pretty god also, just got my engine done last week
Last edited by Resolution78; 05-16-2011 at 09:03 PM.
2012 Boss mustang, UPR upper/ lowers, JLT CAI, flowmaster axle backs tuned by DEZ RACING , billet grill, LS spoiler, 302s HOOD',1/4 window louvers, track key401RWHP11.9
1994 Mustang (PROJECT) 347 stroker, 4 bolt main SVO block, windsor senior cast iron heads, Forged motor built and assembled by DEZ RACING, F1C PROCHARGER Full UPR suspension, smoothed front inner fenders, expecting 750 RWHP on pump gas
2012 Boss mustang, UPR upper/ lowers, JLT CAI, flowmaster axle backs tuned by DEZ RACING , billet grill, LS spoiler, 302s HOOD',1/4 window louvers, track key401RWHP11.9
1994 Mustang (PROJECT) 347 stroker, 4 bolt main SVO block, windsor senior cast iron heads, Forged motor built and assembled by DEZ RACING, F1C PROCHARGER Full UPR suspension, smoothed front inner fenders, expecting 750 RWHP on pump gas
2012 Boss mustang, UPR upper/ lowers, JLT CAI, flowmaster axle backs tuned by DEZ RACING , billet grill, LS spoiler, 302s HOOD',1/4 window louvers, track key401RWHP11.9
1994 Mustang (PROJECT) 347 stroker, 4 bolt main SVO block, windsor senior cast iron heads, Forged motor built and assembled by DEZ RACING, F1C PROCHARGER Full UPR suspension, smoothed front inner fenders, expecting 750 RWHP on pump gas
Last edited by Resolution78; 08-10-2011 at 11:32 PM.
2012 Boss mustang, UPR upper/ lowers, JLT CAI, flowmaster axle backs tuned by DEZ RACING , billet grill, LS spoiler, 302s HOOD',1/4 window louvers, track key401RWHP11.9
1994 Mustang (PROJECT) 347 stroker, 4 bolt main SVO block, windsor senior cast iron heads, Forged motor built and assembled by DEZ RACING, F1C PROCHARGER Full UPR suspension, smoothed front inner fenders, expecting 750 RWHP on pump gas
Got something for those of us who don't do Facebook?
Bruce (aka: "Stealth Fighter Pilot") www.ProjectFallenHero.com
TFS TW heads, rockers, 75mm intake, cam, timing chain/gears, 75mm TB, CAI, MAF, 30# injectors, Aeromotive rails/regulator, 255 pump, Fluidyne radiator, alum water pump, MSD 6A/coil, FR 9mm wires, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (F&R Bilstein), rlca, K-brace, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB, Bi-Xenon...
2012 Boss mustang, UPR upper/ lowers, JLT CAI, flowmaster axle backs tuned by DEZ RACING , billet grill, LS spoiler, 302s HOOD',1/4 window louvers, track key401RWHP11.9
1994 Mustang (PROJECT) 347 stroker, 4 bolt main SVO block, windsor senior cast iron heads, Forged motor built and assembled by DEZ RACING, F1C PROCHARGER Full UPR suspension, smoothed front inner fenders, expecting 750 RWHP on pump gas
NICE! Thanks!
Bruce (aka: "Stealth Fighter Pilot") www.ProjectFallenHero.com
TFS TW heads, rockers, 75mm intake, cam, timing chain/gears, 75mm TB, CAI, MAF, 30# injectors, Aeromotive rails/regulator, 255 pump, Fluidyne radiator, alum water pump, MSD 6A/coil, FR 9mm wires, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (F&R Bilstein), rlca, K-brace, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB, Bi-Xenon...
Posting Permissions
Reply With Quote
Bookmarks